We are buyers mandates and require all of all grades of 
HMS and used rails for import on FOB basis or on cnf 
basis to various countries world wide Our requirement is 
30,000 MT to 200,000 MT per month per buyer

We request replies only from serious sellers and not from 
long broker chains 
The sellers must be able to show their past performance to us

We will provide the buyers documents LOI and bcl
Our requirement for used rails

The rail shall conform to ISRI code 2003 and will be 
used rail steel scrap no.1r50 standard section t rails 
original weight 50 pounds per yard or heavier.

Continuous welded rail may be included provided no weld 
is over 9 inches from end of the piece of rail. Free from 
mid, dust, fluff, non ferrous inclusions, excessive

Rust and other impurities. Free from any explosives, 
shells, cartridges, other arms and ammunitions used or 
otherwise and any closed containers. Free from any

Radioactive materials, any harmful chemicals, substances, 
and coatings, any organic waste and any other harmful 
substances. Dirt, dust, rust, fluff and other impurities

Not allowed over 5%. The rails are to be neatly bundled 
and secured with iron wire or straps, provided with 
adequate lifting hooks.

Chemical specification/composition: Carbon 0.2% to 0.60%, 
manganese 0.60% to 0.90%, silicon 0.15% to 0.35%, 
sulphur 0.05% maximum, phosphorus 0.05% maximum

Isri code:50 65 the scrap consists of r50 r65 of rails as 
R 50(5167 KG/M gost 7173 75), r65(6472 KG/M gost 8 165 75) 
and length: Fr, according to incoterms 2000.