Sl# 24950
Solid Sprinkler Irrigation System from India
Italy
July 23’ 2002
We are interested to place an order for the following:
Technical Specifications For Solid Sprinkler Irrigation
System For Area Of 10,5 Ha
1 Main line pipes Galvanised
Specifications:
The dimension is 5” (125mm) diameter
The length is (6 m) for each pipe
The total length for units is (570 m)
Quick coupling
2 Lateral line pipes Galvanised
Specifications:
The dimension is 3” (75mm) diameter
The length is (6 m) for each pipe
The total length for units is (2790 m)
Quick coupling
3 Sprinklers
Metal sprinklers qty. 165
With double nozzle (6,0+2,1 mm)
At range (30 m) at the full circle operation of (3 bar)
and connection (3/4”) male thread
4 Rizer
Two pieces
(1”x1,5m) (60+90 cm) with hook and upper (3/4”) female thread
Quick coupling
Pipes diameter (25 mm) qty. 165
5 Galvanised valve size (75 mm) qty. 30
6 Galvanised tee (125 mm) qty. 30
7 Galvanised and cap (75 mm) qty. 15
8 Galvanised and cap main line (125 mm) qty. 1
9 Sprinkler adaptor (reducer) qty. 165
10 Galvanised steel pipes reducer (15-75mm) qty. 30
11 (18 m) the spacing between laterals and sprinklers
12 Soil basic infiltration rate is (7,6 mm/hr)
13 Operation pressure for sprinkler is 30 m
14 Operation time for each set is 6 hours
15 Operation time / days is 16 hours/day
16 Pump set specification
The pump set type caprari
Q = 125 m3/hr
H = 70 m
Manufacturing specifications
Pump casing : GG 25
Impeller : bronze
Casing wearing : shaft chrome steel
Shaft sleeve : Stainless steel
Diesel motor
The engine type Deutz F4L912 Diesel
Air cooled (60Hp)
No. of cylinders 4
With silencer and battery
17 The system is suitable to irrigate 10,5 ha
18 The system is suitable to irrigate wheat, yellow corn, etc)
19 Uniformity of water distribution along the system more
than 80%
20 The system configuration is suitable to different shapes
and topography of lands
ALL PARTS OF THE SYSTEM ARE GALVANISED
Contact details