Material: PE of ABS. We want to have plastic that will resist 
to thermal break. Application usage will be made in temperature 
below 0 Celsius degrees; therefore we need to use material to 
resist to thermal break. We are open on the material. 
Size: We absolutely require T dimension handle. No other handle 
will be accepted Length of the top T handle: about 2.50 to 3 inches
Width of the T Handle: about 1.25 to 1.75 inches
Height of the T handle: about 2.0 to 2.5 inches
Height of the top T handle: about 0.80 to 1 inches
Center hole T handle: about 0.28 to 0.30 inches. It is a requirement 
to respect same dimension of very similar hole dimension for 
our application.  
We do not need a ring at the bottom of the handle, it can be straight 
bottom end. Color: Black color and plain. We do not need any 
written information on the handle. 
Weight: It is according to the dimension and the material use but 
we believe in a range of 10 to 30 grams. 
We are flexible for the weight.
Sampling: depending of the proposition and the dimension we 
would require about 25 to 35 samples
First order: 30 000 units.